When we use quartz stone to make kitchen countertops, what are the popular practices now? The simplicity and complexity of our kitchen counter are closely related to our current popular decoration style. Now, the more popular decoration style is modern simplicity and luxury, so the kitchen countertops of this style are relatively simple. In this article, let’s talk about popular practices.
1、 Let’s talk about the position of the front hanging edge of the tabletop.
There are generally two methods for this position.
The first way is to directly turn the angle of 45 degrees, and the second way is to make a small arc surface at the position close to the outer edge opening on the basis of lifting 45 mm.
The second method is mainly to avoid falling down on the ground or the floor cabinet along the tabletop when there is water on the tabletop. However, the style of the first way will be a little more.
2、 Next, let’s talk about the position of retaining water against the wall.
There are also two methods for this position.
The water-retaining of the first way is installed after the installation of the tabletop, so the requirements for the size of the tabletop are not very high;
The second way is to make an arc transition surface between the water retaining wall and the tabletop. This way requires that the water retaining wall and the table top be combined together in the factory, so the requirements for the single processing and installation of the on-site measuring ruler are relatively high. Moreover, due to the uneven wall tiles, the gap between the water retaining wall and the wall will have obvious differences, leading to the later joint beautification treatment is not very beautiful. Therefore, there are many water retaining strips in a first way.
3, let’s talk about the position of the sink.
There are generally three methods for this position. It is defined by the relationship between the sink and the countertop.
First, the sink is covered on the table, which is commonly referred to as the basin on the table. In this way, the outer edge of the sink is higher than the tabletop, so there is a very obvious gap between the tabletop and the sink edge. This position is also a prominent place to hide dirt and accept dirt, and it is not easy for the water to flow from the tabletop to the sink. Second, the sink is basically flush with the tabletop or the sink is about 1-2mm lower than the tabletop, which is commonly referred to as the Taichung basin. In this way, the gap between the sink and the table top is left on the plane. If the seam is beautiful, it will be much better than the first one in the later period, and the water stain or stain on the tabletop can be easily cleaned into the sink.
Third, the sink is bonded under the table panel, which is commonly referred to as the basin under the table. In this way, the gap is left under the table panel, which is more convenient for cleaning and beautifying the table. Therefore, Mode 2 and Mode 3 are commonly used.
A Quartz stone kitchen counter is basically a key position. I hope you can choose specific methods based on your own needs.
