With the upsurge of decoration, stone decoration is especially loved by decorators, which leads to increasing demand for stone, the largest of which is the special-shaped craft plate products. There are many kinds of special-shaped plates, of which edging products account for a considerable proportion. In this article, we will specifically understand the next grinding.
Edge grinding is a kind of stone processing technology that grinds one or several edges of the plate into a geometric shape. Several situations need edging:
● In the stone and stone joint place, especially the wall part;
● In the closing corner of the place is also the need for edge grinding. The closing edge of the stone is very fragile. After grinding, it is not only beautiful but also increases the durability of stone
There are many advantages of edging. What are the specific styles of edging? Now let’s focus on these styles
● Straight edge see light
Straight edge see light this kind of processing technology, is alongside the stone grinding out the light. Just cut out of the stone side is no light, because there is a side is to be exposed outside, to ensure the light of the stone, so must be polished. See light edge is the simplest processing technology, common in the threshold stone, windowsill stone, table stone, etc.
● 1 / 2 Round edge
1 / 2 round edges with a radius less than 10 mm.
● Duck’s beak
It’s shaped like the edge of a duck’s beak and needs light
● Small round edge
1 / 4 round edge with a radius less than 10 mm.
● Beveled edge with visible light
Hypotenuse with hypotenuse less than 14mm
● Hypotenuse
45-degree angle chamfering 5mm polishing
● Double French border
Bonded together by two French sides
● Small hypotenuse
Hypotenuse with hypotenuse less than 14mm
● Bipartite edge
It is composed of 1 / 2 round edges
● Double 1 / 4 round edge
A semicircular edge is formed by connecting two-quarter circular edges
● Nipple edge
It is composed of two small straight edges and 1 / 2 circular edges
● Chess edge
A plane grooved edge is formed by connecting a small straight edge and 1 / 2 circular edge
● Plane grooving
Slotting, a certain depth and width of pits in the plate
● Plane pumping 10 * 5 grooves to see light
Slotting, 10 * 5 pits on the board, and the pits should be visible
● Plane edge of the groove
Cut the L-shaped notch on the edge of the board, the width of which should be larger than the height, and the light should be visible
● Thickened duck mouth
The duck’s beak edge is bonded with the straight edge
● Chicken mouth
Cut a 5 * 5 L-shaped notch on the edge of the plate
● Large beveled edge
It is composed of a small straight edge and a large hypotenuse
● Thickened straight edge or R3 small round edge
It is composed of two straight edges or one straight edge and one R3 small round edge
● Duck mouth full round
The duck’s beak and semicircle are bonded together, and all of them can see the light
● Thickened full circle edge
Two round edges are bonded together
● Thickening bevel
It is composed of a beveled edge and around the edge
● Thicken line edge
The shape of the line can be changed
● Thickened Begonia edge
It is composed of Begonia edge and straight edge
● Thickened French border
It is composed of French edge and straight edge
● Begonia edge
It is composed of two small vertical edges and a circular edge less than 1 / 4 in the middle
● French chess edge
It is composed of a small straight edge and a half-circle edge
● Inverted bottom or surface
The bottom/surface shall be chamfered 45 degrees, and the thickness of the surface/bottom shall be 5mm
● French edge
It is composed of a small straight edge and a quarter circle edge
● Inverted bottom or inverted face 45 degrees 5mm visible light
The bottom/surface shall be cut at an angle of 45 degrees, the thickness of the surface/bottom shall be 5mm, and the light shall be visible
● Big round edge
1 / 4 round edge with a radius greater than 10 mm
● Big hypotenuse
Hypotenuse with hypotenuse greater than 14mm
● Crescent
Bi-directional semicircular edge
Although edging is a trivial thing in the whole stone decoration, it is just the embodiment of the craftsmanship, which makes the whole decorative surface full of beauty and more layers. Well, that’s all for this article. If you have more edging styles, you are welcome to send me an email at sales@sntstone.com
